HILLYARD CHEMICAL CO -- CONTENDER FINISH PART B  -- 8010-00N022303
<pre>=====================  Product Identification  =====================

Product ID:CONTENDER FINISH PART B
MSDS Date:03/03/1990
FSC:8010
NIIN:00N022303
=== Responsible Party ===
Company Name:HILLYARD CHEMICAL CO
Address:302 NORTH FOURTH ST
City:ST JOSEPH
State:MO
ZIP:64502
Country:US
Info Phone Num:816-233-1321
Emergency Phone Num:816-233-1321
CAGE:DO351
=== Contractor Identification ===
Company Name:HILLYARD CHEMICAL CO
Address:302 NORTH FOURTH STREET
City:ST. JOSEPH
State:MO
ZIP:64502
Phone:816-233-1321
CAGE:DO351
Company Name:HILLYARD INDUSTRIES
Address:302 NORTH FOURTH STREET
Box:City:ST JOSEPH
State:MO
ZIP:64501
Country:US
Phone:816-233-1321 (EXT 2303)
CAGE:28745

=============  Composition/Information on Ingredients  =============

Ingred Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000

Ingred Name:EPON 820; (EPOXY RESIN). OTHER MFR CAS #26142-30-3.
CAS:25068-38-6
RTECS #:KC2100000

Ingred Name:2(3H)-FURANONE, DIHYDRO-; (GAMA BUTYROLACTONE)
CAS:96-48-0
RTECS #:LU3500000

Ingred Name:DIIPOXIDE PYROL

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:(ACUTE) EYE IRRITANT. (CHRONIC) EPOXY
    RESINS ARE CAPABLE OF CAUSING SENSITIZATION OF SKIN; SENSITIVITY
    VARIES FROM PERSON TO PERSON.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:PRODUCT IS NOT A PRIMARY SKIN IRRITANT PER
    FEDERAL HAZARDOUS SUBSTANCE ACT, CFR 16, CHAPTER 11C, PARAGRAPH
    1500.41 AND 1500.42.
Medical Cond Aggravated by Exposure:EPOXY RESINS ARE CAPABLE OF CAUSING
    SENSITIZATION OF SKIN; SENSITIVITY VARIES FROM PERSON TO PERSON.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH IMMEDIATELY WITH LARGE AMOUNT OF WATER FOR AT
    LEAST 15 MINUTES. GET MD IMMEDIATELY. SKIN: REMOVE MATERIAL FROM
    SKIN AND CLOTHING. INHAL: IF EXPOSED TO HIGH CONCENTRATION OF
    VAPOR, REMOVE T O FRESH AIR. IF BREATHING DIFFICULTY PERSISTS CALL
    MD. INGEST: DO NOT INDUCE VOMITING; CONSULT MD OR POISON CONTROL
    CENTER IF LARGE AMOUNTS ARE INGESTED.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:NONE
Extinguishing Media:CO2, DRY CHEMICAL, FOG OR WATER SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MAY FORM CO2 AND CO.

==================  Accidental Release Measures  ==================

Spill Release Procedures:DIKE SPILL AREA AND ADD ABSORBENT EARTH, SAND,
    OR SAWDUST TO SPILLED LIQUID. KEEP OUT OF SEWERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CNTNRS CLOSED TIGHTLY WHEN NOT IN
    USE. STORE IN COOL, WELL VENT AREAS AWAY FROM HEAT AND OUT OF
    DIRECT SUNLIGHT. PROTECT FROM FREEZING.
Other Precautions:AVOID PRLNGD BREATHING OF VAPOR OR SPRAY MIST. AVOID
    PROLONGED OR REPEATED CONTACT WITH SKIN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF SPRAYED, USE NIOSH/MSHA APPROVED RESPIRATOR
    FOR MIST AND ORGANIC VAPOR. NONE NORMALLY NEEDED.
Ventilation:MECHANICAL (GENERAL): ADEQUATE VENTILATION REQUIRED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:TO PREVENT REPEATED OR PROLONGED CONTACT,
    WEAR IMPERVIOUS CLOTHING AND BOOTS.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING WASHROOM.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:204F,96C
Vapor Pres:17.36
Vapor Density:0.796
Spec Gravity:1.08
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Solubility in Water:APPRECIABLE
Appearance and Odor:WHITE EMULSION.
Percent Volatiles by Volume:51

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
FIRE AND EXCESS HEAT, STRONG ACIDS.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:CO, CO2 AND PRODUCTS OF COMBUSTION OF
    ORGANIC MATERIAL.

====================  Disposal Considerations  ====================

Waste Disposal Methods:COLLECT ABSORBENT/SPILLED MIXTURE INTO METAL
    CONTAINERS. DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
    REGULATIONS. INCINERATE IN APPROVED FACILITY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.