SCHAEFFER MFG CO -- 238 MOLY ULTRA SUPREME 2  -- 9150-00N084772
<pre>=====================  Product Identification  =====================

Product ID:238 MOLY ULTRA SUPREME 2
MSDS Date:02/15/1996
FSC:9150
NIIN:00N084772
=== Responsible Party ===
Company Name:SCHAEFFER MFG CO
Address:103 BARTON ST
City:ST LOUIS
State:MO
ZIP:68404
Country:US
Info Phone Num:314-966-5681
Emergency Phone Num:314-865-4105; 800-325-9962
CAGE:0DUG2
=== Contractor Identification ===
Company Name:SCHAEFFER MFG CO
Address:102 BARTON ST
Box:City:ST LOUIS
State:MO
ZIP:63104
Country:US
Phone:314-966-5681
CAGE:0DUG2

=============  Composition/Information on Ingredients  =============

Ingred Name:1-DECENE, HOMOPOLYMER, HYDROGENATED; (POLYALPHAOLEFIN
    SYNTHETIC BASE FLUIDS)
CAS:68037-01-4
Fraction by Wt: 10-15%
OSHA PEL:5 MG/M3 (MFR)
ACGIH TLV:5 MG/M3 (MFR)

Ingred Name:MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE)
    HEAVY PARAFFINIC; (100% PARAFFIN BASE OIL)
CAS:64742-54-7
RTECS #:PY8035501
Fraction by Wt: 60-70%
OSHA PEL:5 MG/M3 (MFR)
ACGIH TLV:5 MG/M3 (MFR)

Ingred Name:SOLVENT REFINED RESIDUM; (100% PARAFFIN BASE OIL)
CAS:64742-01-4
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-DEWAXED, HEAVY
    PARAFFINIC (SEVERE SOLVENT-REFINING AND/OR (ING 5)
CAS:64742-65-0
RTECS #:PY8038501
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ING 4:(HYDROTREATMENT); (100% PARAFFIN BASE OIL)
RTECS #:9999999ZZ

Ingred Name:SOLVENT REFINED HYDROTREATED RESIDUAL OIL - (100% PARAFFIN
    BASE OIL)
CAS:64742-57-0
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SOLVENT DEWAXED RESIDUAL OIL (PETROLEUM); (100% PARAFFIN
    BASE OIL)
CAS:64742-62-7
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ALUMINUM BENZOATE STEARATE (ALUMINUM COMPLEX)
RTECS #:9999999ZZ
Fraction by Wt: 7-8%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:MOLYBDENUM SULFIDE; (MOLYBDENUM DISULFIDE)
CAS:1317-33-5
RTECS #:QA4697000
Fraction by Wt: 5-7%
OSHA PEL:5 MG MO/M3
ACGIH TLV:5 MG MO/M3

Ingred Name:METAL DIALKYLDITHIOCARBAMATE; (ANTIMONY DITHIOCARBAMATE)
CAS:15890-25-2
Fraction by Wt: 1-3%
OSHA PEL:0.5 MG/M3 (MFR)
ACGIH TLV:0.5 MG/M3 (MFR)

Ingred Name:GRAPHITE
CAS:7782-42-5
RTECS #:MD9659600
Fraction by Wt: 1-3%
OSHA PEL:15 MPPCF; Z-3
ACGIH TLV:2 MG/M3 RDUST; 9495

Ingred Name:ETHYLENE, TETRAFLUORO-, POLYMER; (TEFLON)
CAS:116-14-3
RTECS #:KX4025000
Fraction by Wt: 1-3%
OSHA PEL:10 MG/M3 (MFR)
ACGIH TLV:10 MG/M3 (MFR)

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGESTION: NAUSEA AND DIARRHEA.
    TACKINESS AGENTS IN THIS PRODUCT MAY BE POSSIBLY COAGULATED BY
    STOMACH ACIDS. EYE CONTACT: REDNESS AND IRRITATION. SKIN CONTACT:
    PROLONGED OR REPEATED SKIN CONTA CT MAY CAUSE A MILD SKIN
    IRRITATION. INHALATION: VAPORS CAN BE GIVEN OFF UNDER HIGH HEAT
    CONDITIONS. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: EXCESSIVE BREATHING OF HIGH VAPOR
    CONCENTRATIONS CAN CAUSE IRRITATION OF RESPIRATORY TRACT. CHRONIC:
    IF INGESTED IN LARGE AMOUNTS OR REPEATEDLY, DAMAGE TO THE
    CARDIOVASCULAR SYSTEM AND RESPI RATORY TRACT CAN OCCUR.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INGEST: IF A LARGE AMOUNT IS SWALLOWED, GIVE A LARGE AMOUNT
    OF H*2O TO DRINK. DO NOT INDUCE VOMITING. TREAT MEDICALLY FOR
    POSSIBLE ABDOMINAL BLOCKAGE. SKIN: REMOVE CONTAMD CLOTHING WASH
    SKIN THOROUGHL Y W/SOAP & WATER. INHAL: REMOVE TO FRESH AIR. IF
    BREATHING IS IRREGULAR OR HAS STOPPED, START ARTF RESP/ADMINISTER
    OXYGEN IF AVAILABLE. EYES: FLUSH W/CLEAN, COOL WATER FOR AT LEAST
    15 MIN. CALL A MD.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:518F,270C
Extinguishing Media:CARBON DIOXIDE FOAM, DRY CHEMICAL FOAM, SAND,
    EARTH, WATERFOG.
Fire Fighting Procedures:FOR FIRES INVOLVING THIS MATERIAL, DO NOT
    ENTER ANY ENCLOSED OR CONFINED SPACE. USE NIOSH APPROVED SCBA &
    FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE EXPECTED.

==================  Accidental Release Measures  ==================

Spill Release Procedures:IMMEDIATELY ABSORB SPILLED MATL W/ABSORB CLAY,
    DIATOMACEOUS EARTH/OTHER SUITABLE MATL. KEEP OUT OF SEWERS &
    WATERCOURSES. ENVIRONMENTAL IMPACT: THIS MATL IS NOT EXPECTED TO
    PRESENT ANY ENVIRONMENTAL P ROBLEMS OTHER THAN THOSE ASSOCIATED
    (SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
    DO NOT STORE NEAR HIGH HEAT OR STRONG OXIDIZERS.
Other Precautions:KEEP AWAY FROM AND FEED PRODUCTS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED UNDER ORDINARY CONDITIONS OF USE.
    NIOSH APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NO SPECIAL REQUIREMENT UNDER ORDINARY CONDITIONS OF USE AND
    WITH ADEQUATE VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:REMOVE OIL SOAKED CLOTHING AND LAUNDER BEFORE
    REUSE. WASH SKIN THOROUGHLY WITH SOAP AND WATER AFTER HANDLING.
Supplemental Safety and Health
SPILL PROC: WITH OIL SPILLS. IF SPILLED INTO A WATERCOURSE, CALL THE
    COAST GUARD TOLL FREE NO. 800 824-8802.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>600F,>316C
Vapor Pres:<.1
Spec Gravity:1.02
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK COLOR, TACKY, SLIGHT SMELL.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:HIGH HEAT, HIGH ENERGY IGNITION SOURCES.
Hazardous Decomposition Products:OXIDES OF CARBON, SULFUR, ANTIMONY AND
    NITROGEN.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF AT AN APPROVED WASTE OR DISPOSAL SITE
    IN ACCORDANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.